High Pressure Washer Spray Gun Red

WHAT’S INCLUDED

• 1 × Brass foam lance body
• 1 × 1 L / 32 oz bottle with volume markings
• 1 × Suction tube
• 1 × Pressure washer adapter (selected model)
• 1 × PTFE sealing tape
• 1 × Extra 1.1 mm brass nozzle (for lower-pressure washers)

SPECIFICATIONS

• Construction: Brass & ABS
• Bottle Capacity: 1 L / 32 oz
• Spray Direction: Adjustable, vertical or horizontal
• Spray Angle: 0° focused stream to 60° wide fan
• Working Pressure: 60-280 bar / 870-4,000 PSI
• Maximum Water Temperature: 60°C / 140°F

KEY FEATURES

Wide Pressure Compatibility
Works with pressure washers from 60 to 280 bar (870-4,000 PSI), making it a good fit for both home users and professional detailers.

Thick, Dense Foam
Produces rich foam that clings to the surface for extensive coverage. The brass and ABS construction stands up well to regular contact with cleaning chemicals.

Large 1 L Capacity
The 1-liter bottle holds enough solution to wash a full vehicle without constant refilling.

Adjustable Spray Pattern
Switch between vertical and horizontal fans and adjust the angle from a focused stream to a wide 60° spray.

Precise Foam Control
The top-mounted knob lets you fine-tune the soap-to-water ratio, so you decide how thick and how plentiful the foam is.

HOW TO USE

1. Wrap the adapter thread with the included PTFE tape, attach the adapter to the foam lance, then connect the lance to your pressure washer gun or extension wand.
2. For thick foam, fill the bottle with about 20% car shampoo and 80% water.
3. Turn the knob on top of the lance to adjust how much solution is drawn from the bottle until you reach your preferred foam thickness.